Ectha 1000

Ectha 1000 Concrete Hammer

The Ectha 1000 series rebound hammer (much the same as the Proceq model which manufactures the original Schmidt Hammer) is used in non-destructive testing of concrete materials, which saves costs and damages to the materials.It fires a spring loaded plunger onto the surface of the material, the rebound of the plunger is then measured in “rebound units” which is compared to a conversion chart. By comparing the rebound units measured on the DRC Ectha 1000 you can easily calculate the rebound value of the material.

The DRC Ectha 1000 comes standard with a carrying case, conversion chart and a calibration certificate and is supplied with accessories that are indispensable for proper investigation of concrete structures. Which include a abrasion stone, a 30 x 30 cm plastic grid, pencil and paper notes, operating manual, and 250ml phenolphthalein.

Mechanical Components:

  • Exterior : Aluminium 6060 – 11S
  • Treatment : Anodizing Oxidation
  • Internal Components: C40
  • Heat Treatment: NIT-OX
  • Movement rod: Steel INOX 303
  • Handle: Hard Nylon
  • Painting : Soft Grey Colours


DRC logo


Physical

  • Dimension : 30 x 7 x 7 cm
  • Weight: 1.1 Kg
  • Packing : 40 x 30 x 15

Performance

  • Range : 5-120 N/mm² MpA
  • Impact Energy : 2,207 Nm
  • Limit Thickness Test : Thickness > 120mm

KIT Ectha 1000 – Accessories

  • Concrete Test Hammer Ectha 1000
  • Abrasion Stone
  • Plastic Case for Stone
  • Plastic Grid 30 x 30
  • Pencil
  • Phenolphthalein 250ml
  • Paper Note
  • Operating Manual
  • Calibration Report
  • Soft Case

 

Comments are closed.